Description
26LB050 Bushing Bore Timing Belt Pulley
For Belt: (L), Belt Width: (1/2″), 26 Teeth, Pitch Dia. 3.104″
| Mfr Description:Â 26LB050 X 1/2 MPB GEARBELT PULLEY |
Specifications
| Number of teeth: |
26 |
|
Outside diameter: |
3.074 in |
| Belt width: |
1/2 in |
|
Length through bore: |
1-1/4 in |
| Pitch: |
3/8 in |
|
Face width: |
3/4 in |
| Bore diameter: |
1/2 to 1-3/8 in |
|
Pulley construction: |
Plain |
| Flange outside diameter: |
3-3/8 in |
|
Number of hubs: |
1 |
| Pitch diameter: |
3.104 in |
|
Hub diameter: |
2-1/4 in |
| Belt type: |
L |
|
Hub projection: |
1/2 in |
| Bore type: |
Rough Stock |
|
|
|
| With flanges: |
With Flanges |
|
|
|
DESCRIPTION
- Combining the positive action of gears with the flexibility, speed and low noise level of belts
APPLICATIONS
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
FEATURES
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
- Constant Speed – No slip, no creep, minimum backlash, because of the positive grip of the belt teeth with pulley grooves.
- High modulus strength member – Needs minimum take-up.
- Freedom from initial belt tension – Reduces bearing loads, increases life.
- Compact design – gearbelts permit smaller pulleys, shorter centers, narrow belts
- Lightweight – High horsepower-to-weight ratio makes Gearbelt drives ideal for any application where weight is an important factor.
- Less heat – because Gearbelt drives generate virtually no friction!
- No lubrication required.
- Wide load capacity range.
- Wide belt speed range.
CAUTION
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
